2E Industrial dehumidifier Air Master 50 50l/day 140m sq 300m cubic/h 750W LCD display electric control timer IP22

Product code: 2E-ID750-50L

Industrial dehumidifier 2E 750 W (product code: 2E-ID750-50L) is a powerful, mobile dehumidifier for removing excess moisture from the air in rooms with an area of up to 140 m2.
It is used for dehumidification of storage rooms, damp basement, when eliminating the consequences of flooding, for precise control of microclimate in storage, as well as in construction, for drying plaster, screed, for drying wooden or plaster products, to maintain humidity in warehouses and production facilities.

26 299 uah.*
Main:
Power 750 W (макс. 950 Вт)
Drainage zone 140 m² (при висоті до 2.7 м)
Moisture removal from 50 liters per day (30°С, RH80%)
Airflow 300 m³/h
Coolant R290 200 г
Programming operating time up to 24 hours
Features LCD display / easy to clean filter / automatic defrost function / possibility of continuous draining / water outlet through a rubber tube / on/off timer / saving settings (in case of sudden shutdown) / mobile construction on wheels for transportation
Water tank 7 l
Operating temperature from +5 to +35°C
Air humidity control range RH10% до 95%
Additionally :
Sound pressure level (LPA) 56 dB
Current strength 4 A
Degree of protection IP22
Supply voltage 220-240 V ~50 Hz
Complete set dehumidifier / lever / wheels / water tank / instruction
Physical:
Power cord length 1.5 m
Length 45 cm
Width 48 cm
Height 65.5 cm
Weight 30 kg

Dehumidifier 2E-ID750-50L operates in the temperature range from +5 to +35°C with a capacity of up to 50 liters of moisture removal per day. Condensate can be discharged either into a container or into the drain (sewer).

A wide range of air humidity control, adjustable from 10 to 95% relative humidity, is a very important mode for technological processes or storage conditions in the warehouse. It is set by means of buttons and is shown on the display. The display then changes to show the current humidity level.

The robust steel housing of the dehumidifier with anti-corrosion coating guarantees its strength and durability, while the high tightness guarantees protection against water/dust ingress inside the dehumidifier mechanism. 
Due to the large wheels and steel handle, it is easy to transport or quickly move in construction or production sites without much effort.
On/off timer. 

Protection against frequent starts. After switching off, the compressor is switched on again with a delay of 3 minutes.
Control panel with indication of operating and emergency modes.

Highly efficient and environmentally friendly refrigerant R290 is used, which is considered one of the best options and is widely used in modern refrigeration equipment.

Recommended products
2E Industrial fan heater electric, Ceramic, 2kW, 20m sq, 142m cubic/h, ceramic heating element (PTC), yellow
Product code: 2E-AHC2000S
1 095 uah.*
2E Industrial fan heater electric, Stainless, 3kW, 30m sq, 286m cubic/h, heating element – stainless steel, IPX4, black
Product code: 2E-AHT3000
2 499 uah.*
2E Industrial fan heater electric, Stainless, 2kW, 20m sq, 239m cubic/h, heating element – stainless steel, IPX4, black
Product code: 2E-AHT2000
1 999 uah.*
2E Industrial fan heater electric, Ceramic, 3kW, 30m sq, 280m cubic/h, ceramic heating element (PTC), black
Product code: 2E-AHC3000
1 949 uah.*
2E Industrial fan heater electric, Ceramic, 2kW, 20m sq, 197m cubic/h, ceramic heating element (PTC), black
Product code: 2E-AHC2000
1 249 uah.*
2E Industrial fan heater electric, Portable Ceramic, 2kW, 20m sq, 139m cubic/h, ceramic heating element (PTC), black
Product code: 2E-AHC2000P
1 499 uah.*