In the event of a power outage or other problems with the network, the output sockets continue to receive voltage from the UPS for a limited time. Connect critical equipment, such as a computer, monitor or other data transmission devices, to the output sockets.
Do not connect non-computer related equipment to the UPS, such as medical equipment, life support equipment, microwave ovens, and vacuum cleaners.
An input fuse/circuit breaker provides protection against unstable input current.
2E-PS1500RT UPS linear-interactive type with a capacity of 1,500 VA / 1,200 W with built-in batteries. Input : 242-288 VАС. Output: 200/220/230/240 VAC ± 5%, «pure» sine wave. The frequency is 50/60 Hz ± 5% (automatic detection). Automatic test at power-on. AVR automatic voltage stabilization. Also, the UPS is equipped with two batteries (12 V / 9 Ah). The charging current (max.) is 1 A. In addition, RJ45 and USB connectors and an optional SNMP adapter are provided. An LCD display built into the front panel displays information about the device’s operating status, including error codes.
With a weight of 17.2 kg, the device has a rather ergonomic shape, the size is 440 × 410 × 132 mm. Installation type: TOWER. The noise level is 50 dB (1 m). The product has «cold start» and restart functions, protection against overload, short circuit, overheating, full battery discharge. In addition, the device has automatic charging when turned off. ECO power saving mode available.
This UPS is intended for indoor use only, in a closed, controlled environment.
